AQUENCE FD150/6

Technical specifications

Viscosity (according to Brookfield):

2000-3500 MPa.s

pH level:

7-10

Shelf life of the mixture:

16 hours

Recommendations for use

Dorus 150\6 LS is a one-component adhesive composition that is applied without the addition of a hardener. The glue is applied using a special spray gun (nozzle diameter 1.5 - 2 mm). One-sided application of glue is recommended for gluing along the layer. For bonding along the inner and outer radii, after drying the first layer, it is necessary to apply the second one. To achieve the greatest bonding strength, the parts with the applied glue must be pressed within 3 days after applying the glue.

Air drying:

from 30 min.(depending on the temperature, humidity and thickness of the coating layer)

Pressing temperature:

minimum 55°C at the edge of the part

Pressing time:

20-40 sec.

Curing time:

24 hours; full cure in 7 days

Clearing:

With the help of cold and warm water, the equipment can be easily cleaned of uncured glue residues. The hardened adhesive residues are removed mechanically.

Storage and transportation:

The temperature of storage and transportation of the product in the original packaging is from +5 to +30C. The shelf life is 9 months. Before using the glue, it is recommended to mix thoroughly, and after using the containers with glue, keep them tightly closed.