AQUENCE FD144/6
Application areas
- Thermo cladding of relief panels with PVC, ABS or PET films on membrane-vacuum presses both with and without membranes
Product Properties
- Does not contain organic solvents
- Clean application
- High initial strength
- Fills the pores on the edges of MDF parts
Технические характеристики | |
Viscosity (according to Brookfield): | 2000-3000 MPa.s |
pH level: | 7-10 |
Shelf life of the mixture: | 16 hours |
Рекомендации по использованию | |
Dorus 144\6 LS is a one-component adhesive composition that is applied without the addition of a hardener. The glue is applied using a special spray gun (nozzle diameter 1.5 - 2 mm). One-sided application of glue is recommended for gluing along the layer. For bonding along the inner and outer radii, after drying the first layer, it is necessary to apply the second one. To achieve the greatest bonding strength, the parts with the applied glue must be pressed within 3 days after applying the glue. | |
Air drying: | from 30 min. (depending on the temperature, humidity and thickness of the coating layer) |
Pressing temperature: | minimum 60°C at the edge of the part |
Pressing time: | 20-40 sec. |
Curing time: | 24 hours; full cure in 7 days |
Clearing: | With the help of cold and warm water, the equipment can be easily cleaned of uncured glue residues. The hardened adhesive residues are removed mechanically. |
Storage and transportation: | The temperature of storage and transportation of the product in the original packaging is from +5 to +30C. The shelf life is 9 months. Before using the glue, it is recommended to mix thoroughly, and after using the containers with glue, keep them tightly closed. |
The above data, first of all, recommendations regarding the application and use of the product, are based on the knowledge and experience of our company. Taking into account the possibility of using different materials in different working conditions that are outside our sphere of influence, we recommend testing the product in each specific case so that its use makes it possible to use the desired production method and ensures the necessary quality of processing parts. Legal liability cannot be deduced either from these instructions or from oral consultation.
Didn't find the required product? Do you have any questions?
If you have any questions about the availability and assortment of goods, or other questions, you can call us by phone +7 (4212) 476-887, +7 (924) 208-4800, +7 (924) 305-4785.
Or just leave a request. We will contact you and give you an answer.
