Application areas

  • PVC, ABS and PET films in thermal presses with or without a membrane)

Product Properties

  • Does not contain solvents
  • Clean application
  • High initial strength
  • High thermal and moisture resistance
  • Low polymerization temperature
  • Porofill

Technical specifications

Viscosity (according to Brookfield):

about 600-1000 MPa.s

pH level:


Shelf life of the mixture:

(with 5% hardener R.397): 4-6 hours

Recommendations for use

Dorus FD 144/2 LS is a composition used with the addition of 5% hardener DORUS P 397, which is slowly added to the glue with constant stirring. To increase the heat resistance of the final product, the amount of hardener can be increased up to 10%.
The working temperature of the glue and the processed parts should be at least +18 ° C to achieve optimal bonding quality. Lower temperatures lead to an increase in the viscosity of the adhesive. The adhesive mixture is applied using a special spray gun (nozzle diameter 1.4 - 2 mm). As a rule, the glue is applied to the layer in one layer. On the looser areas opened on the inner and outer radii after drying of the first layer of dispersion, it is necessary to apply the second. To achieve the greatest bonding strength, the parts with the applied glue must be pressed within 8 hours after applying the glue.

Air drying:

30-50 min. (depending on the temperature, humidity and thickness of the coating layer)

Pressing temperature:

minimum 60°C at the edge of the part

Pressing time:

20-40 sec.

Curing time:

24 hours; full cure in 7 days


With the help of cold and warm water, the equipment can be easily cleaned of uncured glue residues. The hardened adhesive residues are removed mechanically.

Storage and transportation:

The temperature of storage and transportation of the product in the original packaging is from +5 to +30C. The shelf life is 9 months. Before using the glue, it is recommended to mix thoroughly, and after using the containers with glue, keep them tightly closed.

The above data, first of all, recommendations regarding the application and use of the product, are based on the knowledge and experience of our company. Taking into account the possibility of using different materials in different working conditions that are outside our sphere of influence, we recommend testing the product in each specific case so that its use makes it possible to use the desired production method and ensures the necessary quality of processing parts. Legal liability cannot be deduced either from these instructions or from oral consultation.

Didn't find the required product? Do you have any questions?

If you have any questions about the availability and assortment of goods, or other questions, you can call us by phone +7 (4212) 476-887, +7 (924) 208-4800, +7 (924) 305-4785.
Or just leave a request. We will contact you and give you an answer.

Резьбовые фиксаторы
Leave request


«By clicking on the SUBMIT button, I consent to the processing of personal data»

Leave a request /
Ask a question

«By clicking on the SUBMIT button, I consent to the processing of personal data»