AQUENCE FD144/4

Technical specifications

Viscosity (according to Brookfield):

about 1100-1500 MPa.s

pH level:

6,0-8,0

Shelf life of the mixture:

(с 3-10% отвердителя R.397): 4 - 6 часов

Recommendations for use

Standard application AQUENCE FD 144/4 with the addition of 5% hardener AQUENCE CATALYST R 397, which is slowly added to the dispersion with constant stirring. To achieve optimal bonding results, the operating temperature of the adhesive and the materials to be bonded must be above +18 °C. Lowering the temperature causes an increase in the viscosity of the glue. The adhesive mixture is sprayed with a special spray gun (nozzle diameter from 1.4 to 2 mm). As a rule, it is enough to apply one layer. When applying glue to the edge and inner radii, it is necessary to spray the second layer of glue after the first layer has dried. The parts with the applied glue must be lined within 8 hours.

Air drying:

30-50 min.(depending on the temperature, humidity and thickness of the coating layer)

Pressing temperature:

minimum 60°C at the edge of the part

Pressing time:

20-40 sec.

Curing time:

24 hours; full cure in 7 days

Clearing:

With the help of cold and warm water, the equipment can be easily cleaned of uncured glue residues. The hardened adhesive residues are removed mechanically.

Storage and transportation:

The temperature of storage and transportation of the product in the original packaging is from +5 to +30C. The shelf life is 9 months. Before using the glue, it is recommended to mix thoroughly, and after using the containers with glue, keep them tightly closed.