TECHNOMELT KS351

Scope of application

• Gluing the edge at a feed speed of 12 m/min
• Edge materials: veneer, melamine, polyester, HPL, PVC, ABS, PP, PMMA
• Softforming, including complex profiles
• Processing centers with a direct method of application from 6 m/min
• Features
• Medium-viscous, unfilled
• Universal
• Provides a clean application
• Forms a strong, almost invisible seam
• Very high temperature resistance
• Economical
• It is well applied even on poorly wetted edge materials
• Ensures the formation of a smooth surface even when using thin edge material technical data

Technical data

• Softening point (Ring and Ball), °C ~110
• Brookfield viscosity , 200°C, MPa*s ~75,000
• Temperature resistance, °C ~90
• Tested on 0.6 mm oak veneer using the method of temperature increase according to Henkel standards.

Operating temperature
Recommended operating temperature:in the melting tank, 180-210 °Con an adhesive roller, °C 190-200

Safety precautions
Melt adhesives are prone to vaporization even at operating temperatures. The smell of vapors can cause irritation. Long-term temperature exposure to the melt may cause partial decomposition of the adhesive. Therefore, it is necessary to take measures to ensure the removal of vapors from the working area, for example by installing aspiration equipment.

STORAGE
Store in tightly closed original packaging in a dry and cool place.

Shelf life
Shelf life (in the original packaging), 2 years

The above data, first of all, recommendations regarding the application and use of the product, are based on the knowledge and experience of our company. Taking into account the possibility of using different materials in different working conditions that are outside our sphere of influence, we recommend testing the product in each specific case so that its use makes it possible to use the desired production method and ensures the necessary quality of processing parts. Legal liability cannot be deduced either from these instructions or from oral consultation.